- Moving type
- Driven type
- mechanical and hydraulic
- Paving width
- 2.8 - 6 m
- Hopper capacity
- 12 ton
- Rated power
- 86 kw
- Operating weight
- 13- 14.5 ton
APZ60E MECHANICAL-DRIVEN, WHEEL-TYPE, 2.8-6M PAVING WIDTH, DEUTZ (AIR COOLED) DIESEL ENGINE, MECHANICAL-ELECTRICAL-HYDRAULIC INTEGRATION TECHNOLOGY, HYDRAULIC EXTENDABLE SCREED, CANOPY.
Basic paving width
Maximum paving width
Maximum paving thickness
Diesel engine model
APZ60E asphalt paver is used for paving highroad, urban road, and plaza,square and so on, ideal equipment for construction companies.
The structure ofthis machine is compact, easily operated. It uses advanced double sets ofhydraulic stretching screed and auto level sensing device, so paving densityand smoothness is high. The easily wearing parts use international advancedantifriction material, the reliability of machine is improved.
Basic paving width 2800mm
Maximum extension width 5000mm
Maximum width of paving 6000mm
Maximum thickness of paving 250mm
Minimum thickness of paving 10mm
Traveling speed 2.30～16.84km/h
Paving speed 3.07～9.16m/min
Maximum theoretic productivity 300t/h
Hopper capacity 12 t
Maximum climbing capacity 20%
Length 6394mm (6064mm when transfer)
Width 3000mm (2733mm when transfer)
Height 3695mm (2888mmwhen transfer)
Type windcooling with 6 cylinders
Diesel oil tank capacity 200 L
The machine is driven by mechanical and hydraulic, flywheel is connectedto transfer case, the front is connected to double pump, supplying power formechanism are as followed:
n Track traveling devices
n Conveyor device and distributor device
n Lifting and falling screed, folding hopper and action of cylinders
It is made up of transfer case,gear box with two grades, traveling clutch and chain.
Driven chain gear travels withWheels.
Six wheels bear the weight ofthe whole machine, front wheels are two solid wheels,
rear wheels are four pneumatictires.
The traveling clutch iscontrolled by hydraulic cylinder, and it can rotate itself with
The capacity is 12tons andcontrolled by hydraulic cylinder to be cleared.
It is used to push the back wheels of the loading truck with material.
It is independently driven, clutch for conveyor is controlled byhydraulic cylinder,
power is transferred by chain-wheel to drive scraper.
It has 2 batteries, system voltage is 24V.
It is consisted of steel tubeand cloth.
It has two longitudinal and onetransverse unit, used for automatic adjustment of slope
Hydraulic extension screed
1. Vibration frequency 50 Hz
2. Screed crownadjustment 0— 4%
Packing & Shipment
1) Nude packing
2) Shipped by bulk vessel orRO-RO vessel