- Moving type
- Driven type
- Paving width
- 3 - 7 m
- Hopper capacity
- 12 ton
- Rated power
- 86 kw
- Operating weight
- 16-18 ton
MECHANICAL-DRIVEN, CRAWLER-TYPE, 3-7M PAVING WIDTH, DEUTZ (AIR COOLED) DIESEL ENGINE, MECHANICAL-ELECTRICAL-HYDRAULIC INTEGRATION TECHNOLOGY, HYDRAULIC EXTENDABLE SCREED, CANOPY.
Basic paving width
Maximum paving width
Maximum paving thickness
Diesel engine model
LTL70B ASPHALT PAVER
LTL70B asphalt paver is used for paving highroad,urban road, and plaza, square and so on, ideal equipment for constructioncompanies.
The structure of this machine is compact, easily operated. It uses advanceddouble sets of hydraulic stretching screed and auto level sensing device, sopaving density and smoothness is high. The easily wearing parts useinternational advanced antifriction material, the reliability of machine isimproved.
Basic paving width 3000 mm
Maximum width of paving 7000mm
Maximum thickness of paving 300mm
Minimum thickness of paving 20mm
Traveling speed 0.90～2.86km/h
Paving speed 2.00～3.60m/min
Maximum theoretic productivity 400t/h
Hopper capacity 12t
Maximum climbing capacity 20%
Mass 16-18 t
Length 6565mm(transportation 6530mm)
Width 3210mm (transportation 3200mm)
Height 3050mm (transportation 2840mm)
Type air cooling with 6 cylinders
Diesel oil tank capacity 190L
The machine isdriven by mechanical and hydraulic, flywheel is
connected to transfer case, the front is connected to double pump, supplyingpower for mechanism below:
Conveyor and augerspreading device
Up and down ofscreed, turnover of hopper and action of cylinders
It is made up oftransfer case, gear box with two grades, differential mechanism, semi-axle andchain drive. Traveling is driven by driven chain wheel.
Two crawlers, theplates of crawler with rubber plates, the contacting area of each crawler is3050mm × 300mm
The travelingclutch is controlled by hydraulic cylinder, with stopper, and the machine canrevolve at place.
Hopper capacity isabout 12 tons, hopper is turned by hydraulic cylinder to discharge material.
It is used to pushthe rear tyre of camion.
It is independently driven, clutch for conveyor iscontrolled by hydraulic cylinder, power is transferred by chain-wheel to drivescraper.
It has 2 batteries, system voltage is 24V.
It used framework of steel tubes which are puttogether and equipped canopy.
It is equipped two transverse and one longitudinalautomatic level device, used for automatic adjustmente.
Double sets of hydraulic stretching iron plate
1. Screed Basic width …………………………3000mm
2. Vibrating Frequency………………………....…50HZ
3. Extension segment 0.75m............................................ 2 segments
PACKING & SHIPMENT
Nude packing, shipped by bulk vessel or RO-RO vessel with disassembled components and canopy.